Make It Perfect

.Zippered Pouch Tutorial.

I’ve got some big stuff going down on the blog in the next few days…I FINALLY got around to making another zippered pouch and taking photos along the way to put together a tutorial for you…I’ll be releasing a new pattern on the weekend (yay!) and I’m participating in the Sew Mama Sew May Giveaway Day on Monday with some lovely goodies up my sleeve to give away!! So stay tuned…lots of fun stuff to make and see and WIN 🙂

Lets get this tutorial started then! After making Oishii and then the abundance of zippered pouches that followed I had so many people write to me saying that they are scared of zips! Well, fear zips no more…they are actually quite simple. This is a great beginner zipper project, so gather yourself some materials and lets get sewing 🙂

EASY PEASY ZIPPERED POUCH TUTORIAL


I’m not going to give instruction on how to make the patchwork panel that I use for my pouches…the instructions will vary depending on the size of your scraps and the way you lay them out. A quick run-down though in case anyone wants to get nitty-gritty…I cut and join my little scrap pieces until I get a rectangle which measures 9″ x 6 1/2″ making sure I get a piece of plain white fabric in there somewhere. Then I cut a piece of pellon or quilt wadding to the same size and adhere to the wrong side of the fabric by ironing on if using pellon or pinning around the edges if using wadding. Sew a few rows of stitching above and below seams joining fabric strips (I don’t sew on the white fabric). Using an erasable fabric marking pen, write a word on the white piece of fabric then embroider using 4 strands of cross-stitch thread. Sew on a little collection of buttons.

Okay, so that is a speedy how-to make the patchy panel! Of course you can also just use a single piece of fabric (WAY faster if you do that!) It is up to you if you want to use any wadding on the front or back of the pouch. I used wadding on the front but not on the back…depends on the look/feel you are going for. You could also use a piece of stiffener fabric (e.g. Shapewell) if you want a bit of extra strength or stability.

To make a Zippered Pouch, you will need:
One 9″ x 6 1/2″ rectangle of fabric for front exterior (patchwork pieced)
One 9″ x 6 1/2″ rectangle of fabric for back exterior (mermaids)
Two 9″ x 6 1/2″ rectangles of fabric for lining (green check)
Two 4″ x 2″ (approx) rectangles of fabric for zipper ends (pink/blue stripe)
One 7″ dress zipper


Step 1.
Take the two small rectangles of fabric for zipper ends and fold in half so that short ends meet. Press.
Place the folded edge of the fabric just over the metal stopper on the end of the zipper and pin into place. Sew about 1/8″ from the folded edge of the fabric (be careful not to sew on top of the metal stopper here…your sewing machine will not like it!!).


Do the same with the second piece of fabric on the opposite end of the zipper (it is easier if you open your zipper a bit before sewing so that the zipper pull doesn’t get in the way).

Step 2.
(Don’t think too hard about the next couple of steps because they kinda don’t make sense until you actually follow them!)
Take your front exterior piece and lay on the table with right side of fabric facing up.
Take your zipper and, with right side of zipper facing right side of fabric, place edge of zipper tape along the TOP edge of your front exterior piece. Pin a few times to hold in place.


Now take one of your lining pieces and lay it on top of the front exterior piece with right sides facing. The zipper should be sandwiched between the two pieces of fabric.
Match up top edges of fabric and edge of zipper tape and pin together. (You can remove the pins that were put in earlier to hold the zipper to the front exterior piece now).


Pop a zipper foot on your sewing machine and sew along the pinned edge, about 1/8″ away from the zipper teeth. It can sometimes be tricky to sew close to the edge of the zipper when you reach the zipper pull…make sure your needle is in the down position, lift up your presser foot and slide the zipper towards the back of the sewing machine so that it is away from your needle, then keep sewing.


Step 3.
Fold the exterior front and lining pieces back away from the zipper so that right sides of both pieces are facing out. The zipper should be sitting with one side of the zipper tape sewn between both of these pieces and the other side of the zipper tape left free.


Now take your remaining lining piece and place it on the table with right side facing up. Place the free side of the zipper tape along the top edge of the lining piece. Pin into place if you need to (I usually don’t bother).
Take your exterior back piece and lay it on top of the edge of the zipper/lining with the wrong side of the exterior back piece facing down. The zipper and exterior front/lining pieces should be sandwiched between the exterior back and lining pieces.


Match up top edges of fabric and edge of zipper tape and pin together like you did in step 2 and sew along the edge.


Trim the overhanging raw edges of the zipper end fabric.


Step 4.
Fold exterior and lining fabrics out so that wrong side of one lining piece is touching wrong side of exterior front piece and wrong side of second lining piece is touching wrong side of exterior back piece. The zipper should be sitting nicely in between the front and back fabrics. Press and pin.
With the zipper foot still on your sewing machine, topstitch about 1/8″ away from the folded edge of the fabric down both sides of the zipper.



Step 5.
Open the zipper and leave opened for the following step.
Now open out the fabric pieces and position so that the right sides of the exterior front and back pieces are touching and the right sides of the lining pieces are touching.


Match up raw edges and pin around the entire pieces. When you get to the seam in the middle where the zipper is sewn in, it will be a little bulky. Fold the short end of the zipper and attached fabric so that the fold is facing the lining.


Sew a 1/2″ seam around the pinned edge, leaving a 2″ gap along the bottom edge of the lining pieces for turning. Clip corners and cut a curve into the seam where the zipper is to reduce bulk. Make sure you don’t cut your stitching!


Pull fabric through the opening in the lining until pouch is right sides out. Push the lining into the exterior pouch.
Use the pointed end of a closed pair of scissors to push the four corners of the pouch out.
Slip stitch the opening in the lining closed, snip all stray thread and you are DONE!





I’d LOVE to see any zippered pouches you create using this tutorial! Make sure you leave a comment with a link or email me some pics so I can check it out 🙂

If you find any mistakes or don’t understand anything, let me know and I’ll fix it up!

YOU ARE VERY WELCOME 😉
Previous Post Next Post

You Might Also Like